Skip to main content
insightsoftware Docs insightsoftware Docs
{%article.title%}
Published:
Was this article helpful?
0 out of 0 found this helpful

Adding a New Display with a Jump

Note:

This functionality is only available if you have sufficient privileges. Your privileges are maintained by your system administrator in the IT Management Console .

When you add a Jump to an Angle, it is by default added to all Displays in that Angle. You can also add a new Display with a Jump. The new Display will be added as an ad hoc Display, and the other Displays will not be changed.

To add a new Display with a Jump

  1. Execute the Angle to which you want to add a Display with a Jump. The Angle results page opens.

  2. If you want to preserve the original Angle , save this Angle with a different name to indicate that it contains the Jump .

  3. In the Action bar, click WC_jump_icon. The Apply Jump dialog box appears.

  4. Select the object you want to jump to and click Execute Jump. The new ad hoc Display is added to your Angle.

    Tip: Ad hoc Displays are indicated with .

  5. In the Action bar , click to save the Display .

    You can also save the entire Angle and all the Displays it contains in one go. Click the caret of the Save Display button ( ) and select Save all .

Related topics

Published:

Adding a New Display with a Jump

Note:

This functionality is only available if you have sufficient privileges. Your privileges are maintained by your system administrator in the IT Management Console .

When you add a Jump to an Angle, it is by default added to all Displays in that Angle. You can also add a new Display with a Jump. The new Display will be added as an ad hoc Display, and the other Displays will not be changed.

To add a new Display with a Jump

  1. Execute the Angle to which you want to add a Display with a Jump. The Angle results page opens.

  2. If you want to preserve the original Angle , save this Angle with a different name to indicate that it contains the Jump .

  3. In the Action bar, click WC_jump_icon. The Apply Jump dialog box appears.

  4. Select the object you want to jump to and click Execute Jump. The new ad hoc Display is added to your Angle.

    Tip: Ad hoc Displays are indicated with .

  5. In the Action bar , click to save the Display .

    You can also save the entire Angle and all the Displays it contains in one go. Click the caret of the Save Display button ( ) and select Save all .

Related topics

For an optimal Community experience, Please view on Desktop
Powered by Zendesk