Skip to main content
insightsoftware Docs insightsoftware Docs
{%article.title%}
Published:
Was this article helpful?
0 out of 0 found this helpful

Adding a field to a Pivot

Note:

This functionality is only available if you have sufficient privileges. Your privileges are maintained by your system administrator in the IT Management Console .

You can add a field to your Pivot in each of the available areas.

To add a field

  1. Execute the Angle (see Executing an Angle or Template ). The Angle results page opens.

  2. Find the Display in the Displays pane . If there are many Displays, the Display tab of the Display might not be immediately visible. In that case, click to see the list of available Displays and find your Display there.

  3. On the Details pane (Angle) , click the Display details (Angle) tab.

  4. In the Pivot options section, you can edit the data elements that are part of your Pivot. Click WC_Create_New_Display_Icon in the Row area, Column area, or Data area, depending on where you want to add the field. The Field chooser opens.

  5. Select the field that you want to add to the Pivot.

  6. Click OK. The field is added to your selected area.

  7. Click Apply to update the Pivot.

  8. In the Action bar , click to save the Display .

    You can also save the entire Angle and all the Displays it contains in one go. Click the caret of the Save Display button ( ) and select Save all .

    Note: If you edit and save a Display that is linked to an automation task, you will get a confirmation prompt to indicate this. If you have edited more than one Display , the confirmation dialog box will list them all. Deselect a Display if you do not want to save the changes you made. If you have sufficient privileges, click to open the corresponding automation task in the IT Management Console. Only save your changes if you are aware of their impact. Changing a Display that is linked to an automation task may cause the automation task to fail.

Related topics

Published:

Adding a field to a Pivot

Note:

This functionality is only available if you have sufficient privileges. Your privileges are maintained by your system administrator in the IT Management Console .

You can add a field to your Pivot in each of the available areas.

To add a field

  1. Execute the Angle (see Executing an Angle or Template ). The Angle results page opens.

  2. Find the Display in the Displays pane . If there are many Displays, the Display tab of the Display might not be immediately visible. In that case, click to see the list of available Displays and find your Display there.

  3. On the Details pane (Angle) , click the Display details (Angle) tab.

  4. In the Pivot options section, you can edit the data elements that are part of your Pivot. Click WC_Create_New_Display_Icon in the Row area, Column area, or Data area, depending on where you want to add the field. The Field chooser opens.

  5. Select the field that you want to add to the Pivot.

  6. Click OK. The field is added to your selected area.

  7. Click Apply to update the Pivot.

  8. In the Action bar , click to save the Display .

    You can also save the entire Angle and all the Displays it contains in one go. Click the caret of the Save Display button ( ) and select Save all .

    Note: If you edit and save a Display that is linked to an automation task, you will get a confirmation prompt to indicate this. If you have edited more than one Display , the confirmation dialog box will list them all. Deselect a Display if you do not want to save the changes you made. If you have sufficient privileges, click to open the corresponding automation task in the IT Management Console. Only save your changes if you are aware of their impact. Changing a Display that is linked to an automation task may cause the automation task to fail.

Related topics

For an optimal Community experience, Please view on Desktop
Powered by Zendesk